Do you have ugly kitchen counters, but not the budget to replace. Well I have the perfect solution. Giani Countertop Kit.
Giani Countertop Kit can be used on:
- Formica counter tops and vanities
- Laminate counter tops and vanities
- Corian counter tops
- Butcher block counter tops
- Tile with grout lines
- Cultured marble vanities
- One piece sink and counter vanities
- Primed or painted wood
- Primed or painted drywall
- Cabinet inlays
- Table tops
So, if you have a tile, formica, or laminate counters and want them to look beautiful….do this update. You will be so incredibly happy with the finished look. This isn’t paint, it is minerals. Very thin consistency, almost like water. For those of you who are thinking that you’re not very creative, you really don’t have to be. What is so great is if you make a mistake, you can roll on the primer again and start over. Now I did a different technique, I blended the colors together and added acrylic metallic paint and glitter. For those who are afraid to try my technique, you don’t have to do the same. Just follow the instructions inside the box.
For those of you that want to get your creative juices flowing…have fun with it. I added the extra fine glitter on the bathroom counter top, that I posted yesterday.
So, don’t be afraid to try this!! You can do it! It is only around $80 for the kit and it did my whole kitchen. The kit has everything you will need inside the box.
I finished with the bathroom Makeover…now it’s kitchen time!!!! This is what I decided to go with….Giani Sicilian Sand Kit…
I want to let you know that I do not have any relationship with Giani
,nor did I recieved, it for exchange for review. I tried this brand after I did a lot of research on the product and started with the bathroom counters. I liked them so well…I ordered it on Walmart.com in a different color. It’s the same price all over the internet. Shipping free.
I had brown/golden cabinets. I sanded them all down, painted, then added the trim on the cabinet doors and drawers…I love how they turned out.
This will be a continued tutorial…posting steps as I go…(so I don’t forget anything).
To start, I used a SOS scouring pad to remove all the grease. I rinsed well….then sanded.
Now if you have laminate counter tops…fill in any seams with wood filler. There is no need to sand the laminate counter tops. The different looks are fabulous and they even come in a blue and a red now, so check out the many different colors.
If you remember…..This is the present state of my kitchen:
I used this neat little Ryobi sander. Okay, so it’s not the biggest sander but…it sanded all my cabinets in the kitchen down and has worked so well with my other projects. It is inexpensive, which is remarkable considering it’s size. So I started sanding the tiles. These are ceramic tiles with a high sheen. You won’t be able to remove the sheen. What you are hoping to accomplish is just scratching the surface up a bit for the primer to grab on to. Be sure to rinse off all the dust. Wash down again, and let dry. Be sure if you have a counter top like mine, with grout, that you let the grout dry completely. Be sure to patch deep nicks with wood patch. Sand the patch smooth. Giani will cover thin scratches. Remove any loose latex or silicone caulk, replace with paintable caulk.
These are the drying times:
Roll on one thin coat of Primer, then wait……….8 hours
Lightly sponge on all Minerals, then wait………..4 hours
Roll on first Clear Topcoat, then wait………………4 hours
Roll on your final Topcoat, then wait….
1 hour and carefully remove the frog/painters tape. Score the tape’s edge while pulling it up. Wait 12 hours and apply clear acrylic caulk around sink’s rim to seal out water. Wait 24 hours before using your counter tops and dishwasher…wait 3 days before setting small appliances back on your counter tops.
Giani Granite cures in 14 days.
I have a feeling this is going to be a long tutorial….I just don’t want to leave any important steps out.
So while I am waiting for the counter tops to dry, I will start taping off the cabinets below with plastic. I will also apply 2 rows of tape around backsplash where it meets the counters.
Okay….so here it goes. Now I tore out my backsplash so I didn’t run tape along the back wall.
This is the primer…a little can goes a long way. You only coat once. Giani’s kit comes with everything included except a brush. I need to use one behind the sink where the space is too limited for a roller.( Be sure to wash your brush right away when finished with primer). I covered my new faucet with a plastic bag just to be sure I don’t accidentally get paint on it.
It even comes with two rollers…one for primer…the other for top coat.You roll your roller in one stroke down the side. Now it was a lot harder doing tile in 4″tiles because of the valleys in the tile and grout. Be sure to get it all covered. I went one way, then went back the opposite way to be sure I got into all the grout.It dries to a tacky finish quickly, so…be careful going back to a area…as it could lift the primer. So go slow…take your time in each area.Do you see the areas to the right and left of roller….I did touch them up…but be sure you do the same.
I covered my sink with a towel…just in case!
So now I wait 8 hours….then the fun begins!!! Sponging the minerals on. The minerals are not paint. It is a thinner consistency.
So I started the painting….It’s sponge painting…You can’t make a mistake. If you do, you can just add the black back over it.
So I started pouncing with the first color…
Oh it looks awful! But don’t give up and don’t despair. It will look better with each color you add. Looks like my doggies climbed up there and walked around in the paint…hahaaa
Then you add the second and third colors…it starts to look better when you start applying the third color.
So I keep going back and adding color….You can barely see the lines from the tiles.I ended up blending the colors instead of dabbing the sponge. So my counter top came out a lot different then the instructions.
when 4 hours are up…I will add the first coat of the topcoat. I am thinking of putting some glitter on. If you do this….lightly sprinkle with your fingers.
Be sure to roll your roller evenly onto the counter top. I went from back wall…to front…all the way to the counters bull nose edge and down to end of tile..
I had put tape on stove edge to protect it. I took the foam brush that was included and added the top coat to all the edges around the stove and sink.
I did sprinkle some ultra fine Martha Stewart silver glitter onto top very lightly.
Some of the mineral paint did get on the stove, but was easily removed by Alcohol on a cotton ball
When applying the topcoat, don’t brush on heavily. Remember to start from back of counter top (by the backsplash), and make one thin sweep to the front and down the front edge. When the first coat is dry…4 hrs…lightly sand over the glitter if it’s sticking out above the topcoat. Be sure to wipe any dust away before adding second topcoat. Apply the same way you did the first coat. Second coat is on….. and I can’t wait to put my kitchen back in order….My bathroom Giani White Diamond
counter top, has such a hard shell on it now…It has held up now for 2 years perfectly!
Materials I used for this project:
- Giani Counter Top Kit (Walmart)
- Martha Stewart Ultra Fine Glitter (Walmart)